top of page

CONCRETE REPAIRS WITHIN THE NBS SPECIFICATION SYSTEM

Within the NBS specification system in chapter 21 concrete work sections 24 to 25, much attention has been paid to the elaboration of the repair and protection of concrete structures. This entire process is based on the EN 1504 series of standards for both the products and the execution. This has
major consequences for the description in the specifications and the requirements for implementation and reporting that a contractor of
the work must suffice.

betonreparatie.jpg

The EN 1504 standards series


The products are categorized under parts 2 to 7:
â–  EN 1504 - 2 surface protection products;
â–  EN 1504 - 3 structural and non-structural repair;
â–  EN 1504 - 4 structural adhesion;
â–  EN 1504 - 5 concrete injection;
â–  EN 1504 - 6 anchoring of reinforcing steel;
â–  EN 1504 - 7 reinforcement of corrosion protection.


The execution of the repairs is categorized under parts 9 and 10:


â–  EN 1504 - 9 principles for the use of
products and systems;
â–  EN 1504 - 10 application of products on the construction site
and quality control at work.

The EN 1504-9 principles for the use of products and
systems:

1. Information about the construction

Within part 9 of EN 1504 the principles are included with the corresponding
Information about the construction. At the start of a project is a study
performed to collect information about the structure.

2. Assessment process
There should be an in-depth investigation into the visible and not yet
visible defects in a structure, in order to determine the root causes of the damage
to deal with. This survey is used to assess whether the construction is still
is able to fulfill its function.


3. Management strategy
When deciding on the actions necessary to meet future construction requirements
the owner can choose from a number of options, depending on the outcome
of the concrete inspection.

4. Design of the repair work
The relevant Principles for protection and repair must be defined in accordance with EN 1504-9 and the options for repair included in the
management strategy. After selecting the relevant Principles in accordance with EN 1504-9, the constructor must also take into account the intended use of the structure.

5. Repair work
The appropriate working method is then selected on the basis of the relevant Principles selected in accordance with EN 1504. Preparing it
surface, application and quality control procedure for the repair work must be carried out in accordance with the Part 10 of
EN 1504 included recommendations.

6. Acceptance of repair work
Complete reports of all materials used in the work should be provided at the end of each project for future reference. EN 1504-10 products on the construction site and quality control at work. The EN 1504-10 provides a guideline for quality control that is relevant to the execution on the construction site. Quality control procedures and checklists to support the construction supervisor and overall management of concrete repair
and conservation projects.

The cutlery


After the work has been carried out in accordance with EN 1504-9, this must be described in the specifications. In
the description must also indicate the correct principle and the inspection during the work.
In addition, the correct product must also be included in the description. NBS has this in its system
ensured that the right principles are always linked to the right products, so that there are no errors in the description
can deliver.

In addition to the EN 1504-9 and EN1504-10, NBS has the BRL 3201 - The technical repair and protection of concrete -
included in its system. The BRL 3201 is almost entirely based on EN 1504-9 and EN 1504-10 and states
Dutch concrete reprocessing companies are able to obtain a process certificate. This gives the client some assurance that the requirements in relation to the
principle to be applied, are correctly implemented. Incidentally, it is the choice of the specifier himself whether he wishes to have this work carried out by a company that carries the process certificate and not an obligation in the database.

The following example shows how
NBS has elaborated
repairing concrete based on the EN
1504 standards series:

betonwerk bestektekst.jpg
bottom of page